Wheel Cleaner Acid is a concentrated acid wheel cleaner developed for removing heavy brake dust, mineral deposits and stubborn grime from aluminium rims and wheel caps. Its adjustable dilution range from 1:30 to 1:5 lets you adapt the cleaning strength to the level of contamination, while the fast-acting formula works in approximately 1–2 minutes before thorough rinsing.
Acidic Deep CleaningTargets stubborn brake dust, mineral buildup and ingrained grime
Adjustable DilutionConcentrated formula dilutable from 1:30 to 1:5
Fast Working TimeApproximately 1–2 minutes on cool, dry wheels
1:30–1:5Adjustable dilutionAdapt concentration to the contamination level
1–2 MINFast actionShort contact time before complete rinsing
ALUConfirmed surfacesAluminium rims and wheel caps
01Heavy Brake Dust
Accumulated residue can remain embedded around spokes, corners and wheel barrels.
02Mineral Deposits
Hard-water and mineral buildup can resist ordinary maintenance cleaners.
03Neglected Wheels
Long-term contamination may require a stronger, purpose-specific cleaning step.
04Wrong Cleaner Type
Acidic, alkaline and iron-removing formulas target different contamination.
— Acid Wheel Cleaner
Deep Cleaning for Brake Dust, Mineral Deposits and Stubborn Grime.
Wheel Cleaner Acid is made for demanding wheel-cleaning work where a lighter maintenance product no longer delivers the required result. The acidic formula helps loosen heavy brake dust, mineral deposits and ingrained contamination from aluminium rims and wheel caps.
Use the concentrated formula within its confirmed dilution range of 1:30 to 1:5. Apply it to a cool, dry surface, allow approximately 1–2 minutes of contact time, agitate when needed and rinse thoroughly with high-pressure water. Never allow the cleaner to dry.
Choose Wheel Cleaner AcidMinerals / Heavy Buildup
For stubborn deposits, accumulated brake dust and demanding deep-cleaning work.
Six Controlled Steps for Intensive Wheel Cleaning.
01
Dilute
Prepare the product between 1:30 and 1:5 according to the level of contamination.
02
Check
Make sure the aluminium rim or wheel cap is cool, dry and out of direct sunlight.
03
Spray
Apply the prepared cleaner evenly to the area being treated.
04
Dwell
Allow approximately 1–2 minutes of contact time. Do not let the product dry.
05
Agitate
Work stubborn contamination with a suitable wheel brush when required.
06
Rinse
Rinse the wheel completely and thoroughly with high-pressure water.
Surface Cool, dry aluminium rimDilution 1:30 to 1:5Working time Approx. 1–2 minFinal step Thorough pressure rinse
Important: do not use on hot surfaces or in direct sunlight, never allow the product to dry and always test first in a less visible area. Compatibility with polished, chrome, anodised, matte, coated or other sensitive finishes is not confirmed by the product page.
— Product & Process
Strong Chemistry Requires Controlled Application.
Wheel Cleaner AcidConcentrated 1000 ml formatControl the dilutionWork Stuff Measuring Cup
02Control the contact timeWork for approximately 1–2 minutes and rinse before the cleaner dries.
— Complete the Wheel-Care System
Choose the Chemistry for the Contamination, Then Finish the Entire Wheel.
Acidic cleaner, alkaline cleaner and iron remover are not interchangeable. Select the product according to the contamination, clean the tyre sidewall separately and finish the rubber only after the wheel has been fully rinsed.
It is a wheel-cleaning product with an acidic formula intended for demanding contamination such as heavy brake dust, mineral deposits and stubborn grime.
When should I use Wheel Cleaner Acid?
Use it when aluminium rims or wheel caps require stronger deep cleaning and a milder maintenance cleaner does not provide the required result.
What dilution should I use?
The confirmed dilution range is 1:30 to 1:5. Adjust the concentration to the contamination level and always test first in a less visible area.
How long should it remain on the wheel?
Allow approximately 1–2 minutes of contact time, depending on the contamination. Never allow the product to dry on the surface.
Does it remove brake dust and mineral deposits?
Yes. The official product information identifies heavy brake dust, mineral deposits and stubborn accumulated grime as its main cleaning targets.
Can it be used on hot wheels?
No. Apply it only to cool, dry rims or wheel caps, away from direct sunlight, and rinse thoroughly with high-pressure water.
Which surfaces are confirmed?
The product page confirms aluminium rims and wheel caps. It does not confirm universal compatibility with polished, chrome, anodised, matte, coated or other sensitive finishes.
Acidic, alkaline or iron remover: which should I choose?
Choose ACID for mineral deposits and demanding buildup, ALKALINE for greasy road film and regular wheel cleaning, and Iron Remover for iron particles and metallic fallout.
— Acidic Formula · 1:30–1:5 · 1–2 Minutes
Deep Cleaning Power, Applied with Control.
Choose Wheel Cleaner Acid when aluminium rims need a more intensive chemical cleaning step for accumulated brake dust, mineral deposits and stubborn grime.
01
Demanding ContaminationPurpose-built for heavy brake dust, mineral buildup and neglected wheel surfaces.
02
Adjustable ConcentrationDilute from 1:30 to 1:5 according to the job and test before full application.
03
Fast, Controlled ProcessApproximately 1–2 minutes of working time followed by a complete pressure rinse.
Best choice when:aluminium rims or wheel caps have stubborn brake dust, mineral deposits or accumulated grime that requires a concentrated acidic cleaner
Wheel Cleaner AlkalineHigh-foaming alternative for greasy dirt, road film and regular wheel cleaning
WORK BOTTLEChemical-resistant HDPE spray bottle with dilution markings for controlled preparation and application
